Repeat off
1
Repeat one
all
Repeat all
16 May 2023, 08:00
Does some kind of pin hold the clutch fork in place? I didn't see one when I took it apart, but it looks like one belongs there so I put a nail in place for now. What should I put in that hole if anything?
15 May 2023, 08:00
I just acquired this car and the battery needs replacement.
So Group 59 it seems..but I can't find this size in an AGM.
The car will sit for a long period of time and I prefer something that doesn't need water or any other attention.
Does anyone have a
15 May 2023, 08:00
Out of curiousity, who's put a bunch of miles on their 2011+ s197's?
I just bought my first Mustang (and first American car for that matter) and I plan on daily driving it for probably about 7-10 years.
So I figured I should ask actual owners about the
15 May 2023, 08:00
Little, maybe a lot, about me is I’ve always been a car guy, and an old soul. But I would say the truly life altering moment that changed an interest into an obsession was I watched gone in 60 seconds with Nicolas cage. I watched the movie many times befo
15 May 2023, 08:00
I have a 2010 GT500 (50K) and cleaned my cowl drains twice so far when I noticed water on my floor - this was the issue both times and it fixes the problem.
However I have another issue that I noticed for quite a while and I was wondering if it is common
15 May 2023, 08:00
Hello, does anyone have, or knows where i could get a steering wheel airbag for a beige interior, somewhere in europe?
15 May 2023, 08:00
I have looked everywhere for someone who has the same issues as mine but have had no luck. The issues are on a 2006 mustang gt, manual transmission and 117k.
The car is lowered on sr springs and struts with a one piece aluminum driveshaft. Just recently
15 May 2023, 08:00
My car has been sounding like it is ready to loose power when I have it running, I’ve change the battery and when I put in new spark plugs one of my spark plugs had oil on it. I continue to change the spark plugs, when I started the car it kept shutting o
15 May 2023, 08:00
I have a dead cylinder on cylinder # 6 , new leads, new distributor cap, new spark plugs, all other cylinders working fine, headers exhaust on that cylinder is cold. Checked for spark against block and seems fine, no stuck valve as both compress as normal
14 May 2023, 08:00
Hi, I believe there's a fitting.. maybe called a bung.. that's screwed into the main valve to hold the inner valve steady.. so the brakes can be bled. Any info on where I could get one.. would be great. Thanks in advance!