Repeat off
1
Repeat one
all
Repeat all
23 June 2024, 08:00
2007 Shelby GT. Only mod is FRPP M-6550-3V cam. I did the timing set and the cams all in one go. Stock springs are still in as it was advertised as not a requirement. Can anyone shed some light or point me in the right direction?
23 June 2024, 08:00
My girlfriend wanted a Mustang, we found a 16 Premium EcoBoost convertible. A few things need to be tidied up, but that is expected on an 8-year-old car. My old car hobby currently includes a 66 Triumph TR4a and a 73 BMW 2002tii.
23 June 2024, 08:00
We just bought for my girlfriend a 2016 convertible. Looks like someone at the used car dealer or transit company may have pulled the trunk panel off. The backup camera is off the mount and the front 'inner' piece and the outside piece are separated wit
23 June 2024, 08:00
Hi All , i have joined the forums many years ago , because of health problems , i was away for years and my baby was sleeping in the garage. Now back again , happy to be here. I am living in Istanbul Turkey , i am originally from Thessaloniki Greece. Age
23 June 2024, 08:00
Ok so I just bought this car and it’s gonna need a lot of work but I’m doing it a little at a time. But as you can see in the pictures, the convertible top needs some work.
I’ve already replaced the two hydraulic arms and refilled the fluid and the top wo
23 June 2024, 08:00
I just bought a 2000 gt. The issue I'm having right now is the car tends to vibrate while accelerating. when accelerating the dash and center console start vibrating. not violently but noticeable enough to know there's an issue. so from what I know from t
22 June 2024, 08:00
Hello All,
Just a quick introduction here.
I have been looking to purchase a ‘13 or ‘14 Mustang for quite some time. I finally came across a specimen that “SEEMED” to fit my criteria.
A black 2013 GT base with less than 37k miles.
After about a day of doi
22 June 2024, 08:00
2010 Mustang GT MANUAL
103,000kms/ 64,000miles
Track Pack option
Carbon clutch
GT500 lower control arms
Tuned suspension and struts and
Retuned advance track
3:73 gear ratio
Stock manifold replaced with after market exhaust headers flowing through t
22 June 2024, 08:00
Hi I trying to remove the metal heater by-pass tube on my 92 Ford 5lt V8. Can I remove same without having to remove the inlet manifold?
22 June 2024, 08:00
Hi All,
I'm working on a 2010 S197. The turn signal sequencers were removed during import into Australia, and I was fitting new ones but may have shorted the power to ground at the rear RH disconnect during testing, and now neither turn signals nor hazard