07 April 2024, 08:00
Oxygen Sensor Bank 1 Sensor 1]
Rich to lean sensor threshold voltage (constant)
MID: 1
TID: 1
Value: 449.9 mV
Min: 0.0 mV
Max: 7995.3 mV
Voltage amplitude and voltage threshold
MID: 1
TID: 80
Value: 795.7 mV
Min: 570.0 mV
Max: 7995.3 mV
Heater Current
Source:
All Ford Mustang News
0
07 April 2024, 08:00
Trying to clean up this '87 GT 'vert project car. Cluster looks really rough. I didn't see a replacement background for this one so I am thinking a set of white overlays might be the best option, but would greatly appreciate suggestions.
Source:
All Ford Mustang News
06 April 2024, 08:00
Been wanting to switch out the stock halogens for awhile now and finding OEM HIDs in decent quality for a reasonable price has been pretty difficult. Has anyone had experience with the OEM style LEDs? Like the ones in the link.
Source:
All Ford Mustang News
06 April 2024, 08:00
I have a bought a 2020 used gt automatic digital dash. ive gotten the bezel, additional steering wheel buttons and all. The used digital dash has less miles than my digital dash because i heard it was possible to roll forward the miles with a forscan. i a
Source:
All Ford Mustang News
06 April 2024, 08:00
Hi All, haven’t posted here in years. Last time I posted here I had a 2007 Mustang GT. Switched over to the dark side in 2019 and got a 16 camaro SS. I enjoyed that car but kept having issues with the brakes. I used that as an excuse (along with manual tr
Source:
All Ford Mustang News
06 April 2024, 08:00
Try to keep this short and sweet. I have a dealership right now with $4500 off Coupe and $5000 off premium. I built a coupe as follows:
Race Red manual
Nite Pony Pkg
Active Exaust
MSRP $45725
Sale price $41725
Processing fee $899
Est NJ tax $3097
Est NJ t
Source:
All Ford Mustang News
05 April 2024, 08:00
Anyone have a torque spec for the oil filter on a 2014 GT? I got mixed up reading my notes and torqued the oil filter to the drain plug spec (26 NM) on current oil change. Cannot find a torque spec for the filter anywhere, but have seen some post for ot
Source:
All Ford Mustang News
05 April 2024, 08:00
Hey i just re installed my 4.6 engine after replacing all the gaskets and cleaning it up. Went to start and its making a air in and out sound and wont fire. I checked with scanner and it had one code which was a fuel pressure sensor and i replaced and its
Source:
All Ford Mustang News
05 April 2024, 08:00
So I'm thinking of getting the BBK Long Tube Headers but want some advice. I've read a few people say BBK is bad and what not but I would like some advice and any ideas. My car is also lowered 2 inches so will there be any clearance issues as they go down
Source:
All Ford Mustang News