05 January 2021, 08:00
I'm replacing the 289 for a 347 stroker engine.
The kit in it is Eagle Stroker Kit 16022030.
My question is what part of my old setup can be reused?
Flex plate
Harmonic balancer
Oil sump pan
Oil pump
Thanks for chiming in!
Source:
All Ford Mustang News
0
05 January 2021, 08:00
I just purchased a 2015 mustang gt premium , my question is; is there anyway to start the car up quietly before getting out on the road, and turning the beast loose?
Source:
All Ford Mustang News
05 January 2021, 08:00
anybody try the ridetech street grip package on a 65 fastback
Source:
All Ford Mustang News
04 January 2021, 08:00
I am restoring a 6 cylinder mustang and when removing the exhaust manifold these "clips/locks" are on the bolts. Having a hard time finding a replacement and/or name for them. Can I just replace with lock washers?
Source:
All Ford Mustang News
04 January 2021, 08:00
I have a reoccurring problem with my 2014 GT. That water is draining into the cabin and settles on the driverside rear passenger foot well at the driveshaft tunnel.
I have taken the car apart and blown out the cowl drains, blown out the trunk drains and
Source:
All Ford Mustang News
04 January 2021, 08:00
Hi everyone, I have a 1988 Ford Mustang GT 5.0 L. I recently started working on it after it had been left to sit for around 7 years. Since then I have gotten it to start and idle and recently I used an OBD I reader to troubleshoot whatever issues there mi
Source:
All Ford Mustang News
04 January 2021, 08:00
I got a 1990 foxbody. On start up it rpms come down to almost stall then fluctuate and eventually settlers out. When driving i press the clutch in and the car stalls BUT if I romp the throttle 2500 or above the car will idle high then slowly come down to
Source:
All Ford Mustang News
04 January 2021, 08:00
Need some advice. Stumped. Sending unit, printed circuit, instrument cluster, and fuel gauge have all been replaced and obviously there IS gas in the tank, but fuel gauge still not working.
Source:
All Ford Mustang News
03 January 2021, 08:00
Hey everybody,
I have a 2012 GT koni orange str/shock, BMR performance springs, 285/35/19 Hankook Ventus V2 tires.
It feels like the rear end is sloppy and abrupt over bad roads and not very comfortable. Now I know the setup I have isn’t the best for tha
Source:
All Ford Mustang News
03 January 2021, 08:00
I have a 95 mustang GT. My strut on the driver side front is leaking, causing creaking noises frequently. I'm thinking of upgrading to coilovers. Chrisfix's coilovers looked high quality, but I don't know that I need all that customizability on my car sin
Source:
All Ford Mustang News