05 December 2020, 08:00
In the near future, I was hoping to have a shop install 4.10 gears (I usually do car work myself but this seems out of my scope) on my 95 mustang GT. Currently, I have 2.73 gears, which just don't give the acceleration I want and the gears are very long.
Source:
All Ford Mustang News
0
05 December 2020, 08:00
So I realized my wording of the title on the last post sounded dumb and I'm going to try to summarize it so I don't really bore anyone to death so I can get some help. I see wires going to the left fender well and I don't know whats down there (yet). Hopi
Source:
All Ford Mustang News
05 December 2020, 08:00
Hoping I can get some direction.
I recently got a 70 Mach1 with a 351c 4v 4brl. the previous owner swapped the 3spd manual for a T5-5spd. In the purchase he gave me the 3spd. I was under it the other day and the T5 is obviously shorter that the 3spd and
Source:
All Ford Mustang News
04 December 2020, 08:00
Post up your pics of your ride here when you get it.
Source:
All Ford Mustang News
04 December 2020, 08:00
Does anyone have experience with the ceramic detail wax? My detailer wants me to put it on my 2013 Boss 302. He says he can apply a 6 months, 1year, 3 years or 8 years application on the car.
Source:
All Ford Mustang News
04 December 2020, 08:00
Hey Folks,
I hope someone can suggest where to go from here.
I have the 4.6L in a 2005 Mustang GT.
We have no oil pressure reading on the "gauge" which I know is really an idiot light with a needle.
So I replaced the pressure switch and even after warming
Source:
All Ford Mustang News
04 December 2020, 08:00
So I've had a problem with this car for a little while where sometimes it won't start, so I have to close the door, unlock it and lock it again with the fob, and only the fob and it'll start. I drove it then parked it (cuz I was moving) lost the key fob a
Source:
All Ford Mustang News
04 December 2020, 08:00
I have a 2001 mustang GT I just replaced the fuel pump filter filter ccrm and the crank sensor but I’m only getting roughly 10 on my fuel pressure
She’ll idle for maybe a min the sputter out and die any ideas
Source:
All Ford Mustang News
04 December 2020, 08:00
I was looking for some insight on what I should do with these wheels I purchased earlier this year. The wheels have chrome plating but it's chipping and also has pitting but not noticable unless your close enough to see it. I want to get them powder coate
Source:
All Ford Mustang News
03 December 2020, 08:00
I've got a rebuilt 4.6 motor in mustang GT I was driving it and soon as I pulled it in the yard motor locked up and I don't know what's wrong
Shane Stuart said:
I have a brand new rebuilt 4.6 motor in my mustang GT I was d
Source:
All Ford Mustang News