Repeat off
1
Repeat one
all
Repeat all
02 August 2020, 08:00
I have an 06 GT that's heavily modified with Comp Cams XFI Stage 2 NSR Cams, Magnuson MagnaCharger Intercooled Supercharger, Steeda CAI, JBA Cat4Ward Headers, FRPP 4.10 Gears, FRPP 62mm TB, MAC Pro Chamber Mid-Pipe, Bassani Axle Backs and a few minor item
02 August 2020, 08:00
Help, I have a brand new 2011 V6 mustang, when driving at any gear, if I go over 2500 rpm and then let the car role in the same gear, when it gets back down to 2500 RPM the car start and the gear shift starts vibrate, most noticeably in 3rd and 4th gear.
02 August 2020, 08:00
Well I noticed today on the highway that something I noticed during the test drive was getting much worse. Does anyone have this feeling where when the car is coasting in gear at maybe 45 mph and is experiencing engine braking (not pushing the gas) aroun
02 August 2020, 08:00
I just picked up a '14 v6 out of a wrecked Mustang and was thinking of swapping into something else and was wondering if anyone has done it yet. I'm sure there have been swaps already but I couldn't find any successful ones. I figured if you threw a small
02 August 2020, 08:00
I have to remove the door panels and send them off to an upholstery place to get the inserts repaired. While those are at the upholstery shop, the car needs to go to another shop to get some mechanical work done.
The removal of the door panels look easy
02 August 2020, 08:00
A couple of weeks ago I bought a 2004 Mustang convertible. I'm confused about the alarm. Is the alarm automatically armed when I push the lock button on my remote? I don't get any kind of indication, like a horn beep or light flash. Shouldn't I hear or se
02 August 2020, 08:00
I have a 1999 Mustang thats been sitting for some time now. Last time it startes was around 4 years ago and we haven't tried again till a week ago.
I have tried the following methods:
-Both keys
-Charging battery
-Replace battery entirely
-Unhook batte
01 August 2020, 08:00
Hey everyone I need some help so I have an 08 mustang gt/cs it has 88 thousand miles. I’ve had the car for 5 months. Pretty much baby it and only drive from work to home. Recently i started to hear a grinding noise while driving. It starts only when in lo
01 August 2020, 08:00
I need to replace a leaking master cylinder on a 66. If it is the original I would like to attempt to rebuild it. Can anybody help me in identifying it? About the only thing I can decipher is that it's a 1" bore. Assuming that's correct for a manual m
01 August 2020, 08:00
I have a 96 4.6 convertible, I am having intermittent issues with keeping it running. Replaced the fuel pump and filter, all power at fuse block is fine, but at least one or twice a month I'll have minimal to no fuel pressure at the rail, car will start a