22 July 2020, 08:00
Hi im Dan ....hope to help and get help or just talk mustang's..thanks
Source:
AllFordMustangs
0
22 July 2020, 08:00
Hi seen some good advice on this site like to talk about putting a 2001 ford explorer 5.0 in a 65 mustang ther was a guy on here that has done it 4 or 5 times with good results and little money thanks for any and all help ...
Source:
AllFordMustangs
22 July 2020, 08:00
I have a 2007 Mustang Gt premium convertible
A while back I was driving and all of a sudden my radio cut out (stock shaker 500)
Got home and tried everything to get it to turn back on and it wouldn’t. I checked all the fuse for it and turns out it was jus
Source:
AllFordMustangs
22 July 2020, 08:00
Well, I started a new project & decided to rebuild the engine with Manley pistons and H-Beam rods, stage 2 blower cams and stage 2 MHS P&P heads...
What would cause the cylinder heads and pistons to look like this?
Kenne bell Tune was updated a few week
Source:
AllFordMustangs
22 July 2020, 08:00
I recently replaced my roller rockers and lash adjusters after a ticking noise started. That resolved that issue. But when I started it, it ran very rough.
I narrowed it down to the MAF sensor and replaced it. It ran better for about 30 minutes and th
Source:
AllFordMustangs
22 July 2020, 08:00
Hello everyone,
I've recently bought a used 2011 with 63k miles on it and out of nowhere I decided to check the oil and noticed I was low so I filled it back up to the top and kept driving. After 1k miles I checked again and saw that I was 2 quarts low, I
Source:
AllFordMustangs
22 July 2020, 08:00
Hey All.
So for some reason my Tail Lights are on even with the Light Switch in the off position. As soon as the key is turned to the on position, is when they come on. But what is strange, when the Light Switch is in the 1st or 2nd positions with the ke
Source:
AllFordMustangs
21 July 2020, 08:00
Hey all!
So I am very new to mustang ownership, coming from an automatic V6 charger, I have minimal experience with manuals and want this car to obviously change that. Driving home from the previous owner's house, I was swift with the shifts 2-6 but ha
Source:
AllFordMustangs
21 July 2020, 08:00
Ready to give your Ford Mustang the makeover it deserves? Start with a set of high-end custom wheels by HRE. This brand has been producing wheels for almost 30 years. Today HRE offers cast flow-formed wheels made to provide forged-like strength at a lower
Source:
AllFordMustangs
21 July 2020, 08:00
I tired to turn my single exhaust into dual..
So I recently got a dual exhaust off a v8 gt, and had to customize the right side to bolt up to the headers right, to do so I had to cut the original piece and make a 90 degree angle to be able to hook it up t
Source:
AllFordMustangs