Repeat off

1

Repeat one

all

Repeat all

News
13 August 2024, 08:00
Hey guys I have a 00' v6 that I want to put a 302 in. I found one for 200$ but I was wondering what I would have to change to get it to fit. My v6 has the t-5 in it already so the trans should bolt right up but what other mods would I have to do?
13 August 2024, 08:00
Hello guys, I'm currently in a pickle situation. I bought a 2003 Mustang Mach1 but it's not complete. So far i have the shell of the car with suspension, wheels, engine and transmission. A friend suggested to buy a 2003 Mustang GT as a donor car in order
12 August 2024, 08:00
I had to replace my water pump on my 351C engine. Ordered a new water pump from NPD and noticed the heater hose connector on the new water pump was sticking out further than the old one. Is this normal or do you pound it in further? It looks like sealant
12 August 2024, 08:00
Hello everyone. This is my first post here. I've got a 2003 3.8 V6 that has some very strange issues with the wiper blades. What happens is I turn the stalk to any intermittent mode, and the wiper arms go up about a couple inches and immediately stop and
12 August 2024, 08:00
Hi I'm a retired 2015 mustang v6 convertible owner. Love the way the car handles. Would like to raise passenger seat 2 in for my very short wife
12 August 2024, 08:00
Anybody have any ideas on how to get this sensor out without pulling the motor?
11 August 2024, 08:00
Hello everyone, I recently bought a 2007 V6 Mustang. I want to add more LED lighting in the interior and have it synced with the MyColor system. I'm thinking it's as simple as splicing a 12v common ground rbg strip into the harness somewhere, but unsure.
11 August 2024, 08:00
I have a 2005 mustang GT with a 5 speed manual transmission. My rpm’s read 0 at idle and low while the vehicle is in motion. I check the fuses and are all in working order. The RPM is the only gauge that is having malfunctions. What should I check next?
11 August 2024, 08:00
Hello!! I have a 2017 Mustang v6 and I want to change the radio to an original shaker. I got one and I would like to know if it is possible to do the upgrade?
11 August 2024, 08:00
I am restoring two 1970 Boss 302s. I have discovered that one of them has a relay (see photo) mounted on the body just above the passenger side vent, while the other does not. My wiring diagram does not show this relay (I assume it is a relay). Does anyon