Repeat off

1

Repeat one

all

Repeat all

News
31 January 2024, 08:00
Hey guys, I’m in the process of putting a 8.8 in the 85 svo. I’m running stock length fox axles and need to upgrade the brakes. I’m on a budget so things are taking time to get done but my question is…if I upgrade just the rear brakes to the sn95 cobra b
31 January 2024, 08:00
Morning All..... Been a while since I have been on here. Had some more work done on my '22 GT. New Fuel System, bigger injectors, new pulley, and best of all.... New Lund E85 Tune!! Gained 200 RWHP with the work and thing is scary fast. Will never run 93
31 January 2024, 08:00
I recently bought a 2007 mustang gt. It has a K&N intake on it and I noticed about a week ago that my intake pops off the throttle body after almost every drive. Noticed that there is a bracket holding up the bottom of the intake that broke. Does anyone k
31 January 2024, 08:00
Thinking I need a new Smart Junction Box/BCM due to my key fobs both being intermittent and now TPMS system error. So I got the part number from the current box and found several on ebay. HOWEVER, when (just for kicks) I called the local Ford dealer to s
31 January 2024, 08:00
Hi all, I recently began tearing my engine apart in search of what is causing a very loud clattering sound which I believe may be a spun bearing. However both my mechanic and Ford diagnosed the sound as lifter tick so decided to pull the driver side valv
30 January 2024, 08:00
What are the black rubber circles on the floor beneath the rear seat. They have cables attached to them?
30 January 2024, 08:00
All, I'm in need of some help and I figured that this is the place to come. I'm currently working on my dream build and doing it alone. That sucks but when you've been in the Navy for 26 years most of your friends are old and broken (Like Me). So, I'm rea
30 January 2024, 08:00
Hi, I just installed a cold-air intake on my 2022 Mustang GT. I test-drove the car and all was fine same day of installation. The next day I was driving the car and suddenly, I pressed the gas and the car stalled and lost power. I downshifted and all was
30 January 2024, 08:00
hey i’m new to this and i jus want to ask if anyone else has had a problem where there is a weird noise coming from the engine bay, kind of like a grinding and squeaking noise. i believe it’s my pulley bearings but im not completely sure on that. jus want
30 January 2024, 08:00
Hi, so I recently bought some d5 18x5 and they came with 215/55/18 tires which are too wide for the fronts, my car has 275/60/15 rears and lowered on cobra jet springs, I do daily this car will take any tire recommendations