26 July 2023, 08:00
I've recently had my Coolant light come on and then of course the engine light. I've already replaced my thermostat housing with an aluminum one 2 years ago. I just replaced the sensor today and I still have my engine light on. I don't however see the coo
Source:
All Ford Mustang News
0
26 July 2023, 08:00
Hi,
I am attempting to replace the turn signal switch on my 66 mustang coupe. The previous owner damaged the thread on the male puller holes. I was planning to put a Tap through the thread to clean out the thread. The bolts that came with the steering whe
Source:
All Ford Mustang News
26 July 2023, 08:00
I have searched the forum but didn't find any ideas....
I can't get the steering wheel off my 66 Coupe....Bent a steering wheel puller trying to do so....I've been spraying penetrating oil for 3 days little by little on the shaft....She ain't budging...
Source:
All Ford Mustang News
26 July 2023, 08:00
I am in the process of upgrading my 1994 Mustang Convertible from the stock premium sound to the Mach 460 system. I know that I will need a few new harnesses to make this happen. The one I have pictured here, is for a Mach 460 system (it is the harness th
Source:
All Ford Mustang News
25 July 2023, 08:00
Hello I have a 1968 mustang 289 and have had issues with the gauges not working. My temp gauge starts at cold and climbs to hot as I’m driving or idling seems like in 3 minutes the car marks hot but eventually after another 3 minutes or so it will fall ba
Source:
All Ford Mustang News
25 July 2023, 08:00
High beams wont stay on replaced multi function switch relay and bulbs still wont stay on when you release the wand.
Source:
All Ford Mustang News
25 July 2023, 08:00
I was bleeding the air out of the hydraulic system when the drivers side piston's top blew off the cylinder portion (only about 10 up/down cycles before this happened). Although the cylinders I bought to replace them are (70$-ish for a pair from ebay). I'
Source:
All Ford Mustang News
25 July 2023, 08:00
Not sure if I’m at the right place to be asking tech question. First time on this site. Rebuilding 302; get it broke down and find it has roller cam and roller lifters but it’s been running with flat tappet rockers. It’s got me scratching my head. I thoug
Source:
All Ford Mustang News
25 July 2023, 08:00
This is a very odd condition. I have a solid 12 V coming from the battery to the starter solenoid. The car starts right up, however, when I measure the voltage on the other side of the solenoid (the heavy black gauge wire going to the starter) I have fluc
Source:
All Ford Mustang News
25 July 2023, 08:00
I have a 1998 Ford Mustang GT. In the past ive made a post about my transmission. with it pulling like 8 different codes, for example Shift Solenoid A and B and a couple others. But now it only shows a code for Shift Solenoid B
I think ive narrowed it do
Source:
All Ford Mustang News