26 March 2024, 08:00
I'll ask all my questions at the end but let me tell you some background information.
I got an 88 GT convertible and someone did a complete hack job and put in a 3 speed MANUAL (2 bolt starter)
Car ended up being pretty rotted at the lower strut towers (d
Source:
All Ford Mustang News
0
26 March 2024, 08:00
i was woundering if anyone could tell me if the 1970s 302 crank can be used for a ho roller cam i know the non ho crank is 28oz and the ho is a 50oz but is the stroke in the same spot that?
Source:
All Ford Mustang News
26 March 2024, 08:00
When you turn the a/c on does the cooling fan come on? Mine doesn't turn on and I though when you turn the a/c on it turns the high speed fan on. Ive replaced the ccrm thinking it was bad but even after that it still does not come on. I also replaced the
Source:
All Ford Mustang News
25 March 2024, 08:00
So this is my first post, and I’m not sure if I am in the correct forum or thread so my apologies in advance. Basically I did a quick 1-2 gear rip and ever since then my car has ran funky with the AFRs all over lean/rich sometimes cruising it’ll just kick
Source:
All Ford Mustang News
25 March 2024, 08:00
My pony is 2008 GT with manual transmission. The problem I have is the Engine looking to stall when the car is coming to a stop with the brake applied (the gear is in N already). Any help please..
Source:
All Ford Mustang News
25 March 2024, 08:00
Hi all,
Joined after reading some threads about fuel issues; I'm about to tackle a carburetor repair today. Just wanted to say hello, post a picture of my baby and introduce myself a little. Getting the Izzystang (long story) is the fulfillment of a 30 y
Source:
All Ford Mustang News
25 March 2024, 08:00
I’ve gots a 1989 2.3 that’s bored 30 over, block and head have been milled down, I’ve put a jet performance chip in it, exhaust system is straight pipe with a muffler no catalytic converter. I tried to get the machine shop to put an aftermarket cam in but
Source:
All Ford Mustang News
25 March 2024, 08:00
Finally got rid of that eyesore. Halfway there with a friend coming over to fill and spray tomorrow. Filling in washer nozzles as well.
Source:
All Ford Mustang News
24 March 2024, 08:00
Just joined about a week ago. Thought I would give a little background...
Currently enjoying our 69 Mach I and 2011 GT Convertible. Had many Mustangs in the past but at 72 years old, I'm down to two. (Still regret selling my 67 FB. But so it goes...) I'
Source:
All Ford Mustang News
24 March 2024, 08:00
Wondering if anyone has experience with this setup? I found a used one with low km and it looks mint. Very well taken care of. Just wondering if this supercharger is reliable or if I should stay away from the car
Source:
All Ford Mustang News