26 July 2020, 08:00
Hello everyone.
I just recently acquired a 1994 Mustang GT Convertible in White, 5 Speed manual. I am in Canada, But the Stang is from the US. Has 180,000 miles on it, and it runs excellent, even the underneath is pristine. I absolutely love the sound of
Source:
AllFordMustangs
0
26 July 2020, 08:00
I have a 2014 gt that I swapped a Tremec t56 magnum xl into. Since then it's been throwing multiple misfire codes. P0300, 304, 307, and 316. I replaced spark plugs and coil packs on all 8 cylinders. Still threw the codes so I did some forum reading and ot
Source:
AllFordMustangs
26 July 2020, 08:00
I am new to the forum and just got a 2019 5.0 GT convertible. Beautiful car
My issue is that I live in the US but the car is Canadian and the digital speedometer default is in KPH. I would like to change the readout to MPH. I can get the sub readout to
Source:
AllFordMustangs
26 July 2020, 08:00
I have a 05 GT 4.6 with 123,500 on it.
Had it since 90,000.
I'm having a bad sputtering, not every day, mostly under slower speeds and from a stop.
#7 coil was diagnosed in shop as bad. Problem came back inside of 2 days.
I just changed fuel filter mysel
Source:
AllFordMustangs
25 July 2020, 08:00
I have a 96 gt convertible 5 speed that I recently put different rims on. The guy didn't put them on in the right direction and after about 500 miles one day I took off slowly and the wobble started. I rotated the rims to the correct position. Still wobbl
Source:
AllFordMustangs
25 July 2020, 08:00
Any one heard of any plans to discontinue the Coyote V8, in the Mustang GT and replace with V6 Eco Boost, maybe 2022 model?
Source:
AllFordMustangs
25 July 2020, 08:00
I have a 1964 1/2 Mustang Coupe260ci C4
Question I have restored quite a few 64 1/2 thru 1966. The floor pan seat riser has the center of seat riser cut looks to be factory anyone come across this see the photo.
Source:
AllFordMustangs
25 July 2020, 08:00
I'm on the fence if I'm going to keep this 2010 GT or not, but I wanted to get some opinions on a clutch kit for it. I'm going to try a steel braided clutch line first to see if I can fix the lock-out issues I'm having, but worst case I'll have to do a cl
Source:
AllFordMustangs
25 July 2020, 08:00
Hi guys.
due to various problems I replaced my alternator and battery. What voltage is ok for a replaced (overhauled) alternator ?
Mine is at 13,3V-13,4V which seems a little low for me.
Do you have any ideas ??
Thanks a lot
Source:
AllFordMustangs
25 July 2020, 08:00
I am looking to buy a 2007 that has a rip in the drivers seat. How much should I expect to have to pay to get this fixed? Need to know for negotiating purposes. Have any of y'all fixed your leather seats before? I see this driver side rip a lot in used ca
Source:
AllFordMustangs