29 July 2020, 08:00
Making a click noise and grinding when turning. Thank you!
Drivers side is full of grease. Passenger side looks normal.
Source:
AllFordMustangs
0
28 July 2020, 08:00
I need to replace the EEC-IV on my 89 Mustang GT. I have not been able to find a source to buy one (Summit, O'Reilly, etc). Any suggestions are appreciated. It's fuel injected, T-5 tyrans, A/C, & power options. Thanks
Source:
AllFordMustangs
28 July 2020, 08:00
I was shooting the breeze today at my local auto zone and one of the employees said "you know what would be cool, is to swap a F-150 3.5 Ecoboost into your 2002 V6 3.8L". Please forgive me my knowledge of swapping motors is very green to say the least. Hi
Source:
AllFordMustangs
28 July 2020, 08:00
I have a 2012 mustang gt, and I was driving up my subdivision hill today and the traction light started flashing and I lost all throttle power, curious on what this means?
Also did a burnout a couple days ago and about 15 seconds in the car loses throttl
Source:
AllFordMustangs
28 July 2020, 08:00
I need to upgrade my DMM. I believe that the recommendation for work around the EEC-IV computer is a voltmeter with an input impedance of at least 10 Megohms. Most of the el cheapo garden variety ones are about 1 Megohm which will load the circuit being t
Source:
AllFordMustangs
28 July 2020, 08:00
Ok guys this is my first discussion I’m honestly nervous I’ll make it quick so I have an 04 mustang and I haven’t drove her in forever I finally got the time to fix it so as soon as I start it it drives fine up to 45 mph then when the engine has warmed up
Source:
AllFordMustangs
28 July 2020, 08:00
So I'm doing my first performance build ever however not my first engine rebuild. Building a 302 for my mustang and the lunati bare bones cam with 280/290 duration with a 472 and 496 lift i was wondering if anyone else has done this on a stock 302 and how
Source:
AllFordMustangs
28 July 2020, 08:00
Hey Gurus,
Your help is much appreciated in helping me identify the part that is leaking in the picture. Is that the cam sensor. And if anyone faced that before!
it's at the bottom right side of the intake manifold, and just after the air intake hose.
T
Source:
AllFordMustangs
28 July 2020, 08:00
Hey guys,
I'm new to the forums. Hopefully I am in the right place. I have a 2007 Stang GT with the 4.6 3V. Its got the Saleen Supercharger Kit V1.5 with the Saleen Speedlab gauge pod ( boost and air temp gauges ). I have never been a fan of this gauge p
Source:
AllFordMustangs
27 July 2020, 08:00
Can someone please help me identify the part. I've looked all over the internet and cant find anything about this part. It's the metal tube with fins that run in front of the condenser, at the lower end of the car. It's a 2010 Gt 3V 4.6L. never owned a Fo
Source:
AllFordMustangs